Analysis of Cs-adsorption behavior using a column filled with microcapsule beads of potassium copper hexacyanoferrate

Ash-washing technology is a crucially important technology for removing radioactive Cs from contaminated ash. For that technology, Cs⁺ removal from the ash-washing solution by the adsorbent is necessary. This study was conducted to establish rapid preparation of appropriate adsorption columns for Cs⁺ uptake. A one-site model was not used for analysis because the model cannot accommodate sites with different adsorption speed. Results demonstrated that the adsorption behavior of the column filled with the granules of potassium copper hexacyanoferrate was well reproduced by a two-site adsorption model with parameters chosen through analysis of batch adsorption test results.     

Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.     

Hydrodechlorination of 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113) over supported ruthenium and other noble metal catalysts

The hydrodechlorination of CCl₂F–CClF₂ (CFC-113) was studied using silica- and activated carbon-supported Ru, Rh, Pd, and Pt catalysts. The activity of the catalysts changed with time-on-stream. Ru was most stable among the four noble metals and gave a simple product distribution yielding CClF=CF₂ (CFC-1113) and CHClF–CClF₂ (HCFC-123a) as main products. Over silica-supported Ru, CFC-1113 yield decreased gradually with time-on-stream but HCFC-123a yield did not change throughout the reaction, suggesting that these products were formed on different sites of Ru. XRD studies and temperature-programmed reduction of the spent catalyst revealed that the deactivation was caused by halogen-containing carbonaceous species accumulated on the Ru surface during the reaction. The carbonaceous species seemed to be formed on the active site for CFC-1113 formation. Because CFC-1113 selectivity was higher over the catalyst having higher Ru dispersion, it was assumed that the hydrodechlorination of CFC-113 is structure-sensitive and CFC-1113 formation is promoted by Ru having highly unsaturated coordination sphere.     

Thermal degradation characteristics of oil‐filled cable joint with extremely degraded tan δ oil

Much of oil‐filled (OF) cable has been used for a long time as 66‐ to 500‐kV extrahigh‐voltage cable. Sometimes we can see extremely degraded tan δ oil (several tens of percent of tan δ, for example) in joint boxes, etc. The values of tan δ calculated by a simple combination model of paper/oil show that the oil‐impregnated paper with such a high tan δ oil likewise has an extremely high tan δ, which must result in thermal breakdown. However, such an event has not taken place up to the present in actually operated transmission lines. This fact suggests that some mechanism for the suppression of tan δ has acted in the paper insulation impregnated with degraded tan δ oil. Therefore, we investigated in detail the tan δ characteristics of paper impregnated with extremely high tan δ oil. In addition, based on the investigation results, we developed a method for simulation of heat generation by dielectric loss in an OF cable joint (which has degraded tan δ oil). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(1): 1–10, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21184     

Measurement of Liquid Film Thickness by a Fringe Method

A technique was developed and tested to measure the local thickness of a droplet or a liquid film on a surface of an opaque or thick single transparent plate by an interference fringe pattern that was easily formed by reflecting laser lights. Monochromatic epi-illumination through an objective lens of a conventional microscope was provided by a 5 mW or 300 mW laser and a filter to remove the noise caused by laser speckle. The incremental height difference of the liquid layer between neighboring maxima or minima of fringes was evaluated from the wavelength of the laser light and the refractive index of the liquid. Estimation error of a local inclination angle was discussed using ray tracing under parallel illumination approximation. Droplet profiles evaluated from the interferogram that were obtained by the present fringe method agreed well with those by Laser Focus Displacement Meter. Measurement was made to ensure the usefulness of the present technique. It was made clear that the contact angle of a liquid droplet could be obtained precisely and swiftly, even in small size or small contact angle, and that instantaneous three-dimensional profile of a liquid film on a bubble moving in a microchannel could be measured. The fringe method had sufficient potential to obtain more detailed information about three-dimensional characteristics of liquid film in flows such as the generation, breakdown, and growth of waves and the liquid film on a bubble at the beginning of movement.     

Electrochemical reduction of carbon dioxide to ethylene with high Faradaic efficiency at a Cu electrode in CsOH/methanol

The electrochemical reduction of CO₂ with a Cu electrode in CsOH/methanol-based electrolyte was investigated. The main products from CO₂ were methane, ethylene, ethane, carbon monoxide and formic acid. A maximum Faradaic efficiency of ethylene was 32.3% at −3.5 V vs. Ag/AgCl saturated KCl. The best methane formation efficiency was 8.3% at −4.0 V. The ethylene/methane current efficiency ratio was in the range 2.9–7.9. In the CsOH/methanol, the efficiency of hydrogen formation, being a competitive reaction against CO₂ reduction, was depressed to below 23%.     

基于灰色神经网络的传感器分段标定

针对大量程高精度传感器不能一次完成标定实验的情况,提出一种将优化灰色GM(1,1)模型与BP神经网络相结合来预测分段标定过程中特征值缺失的方法,从而实现传感器的分段标定。首先,根据实验数据建立传统灰色GM(1,1)模型,对待标定传感器和标准传感器的测量值进行缺失数据的预测;然后,为弱化传统灰色GM(1,1)模型序列变化的幅度,提高模型的预测精度,利用中心逼近的思想对传统的GM（1,1）模型进行优化;最后,利用BP神经网络对优化的灰色GM(1,1)残差序列进行修正,以较高的精度实现对分段标定过程中缺失特征值的预测。结果表明,待标定传感器和标准传感器组合预测模型的平均残差分别为0.023%和0.401%,证明了组合预测模型的有效性。所提出方法为解决大量程高精度传感器分段标定时静态特性曲线的拟合提供了一种新思路。     

Low-temperature sintering of ZrW2O8–SiO2 by spark plasma sintering

Amorphous ZrW₂O₈ powder and amorphous SiO₂ powder were prepared by a sol–gel process as raw materials, and high-density ZrW₂O₈–SiO₂ were successfully prepared at a much lower temperature of 923 K for a much shorter holding time of 10 min by spark plasma sintering (SPS) method rather than by conventional melt-quenching method. The relative densities of 0.85ZrW₂O₈–0.15SiO₂ and 0.70ZrW₂O₈–0.30SiO₂ were 99.4% and 96.6%, respectively. The combined technique of a sol–gel process and SPS should enable us to prepare the varied types of high-density composites of ZrW₂O₈ without severe thermal cracking caused by melt-quenching. The thermal expansion properties and dielectric properties of ZrW₂O₈–SiO₂ were also investigated.     

Synthesis of Si nanowires with a thermally oxidized shell and effects of the shell on transistor characteristics

Silicon nanowires (SiNWs) with a single-crystalline Si core and a thermally oxidized shell (core-shell SiNWs) were synthesized by gold-catalyzed chemical vapor deposition followed by rapid thermal oxidation. To synthesize high-quality core-shell SiNWs, the relationship between the growth parameters and the crystallinity was studied. Furthermore, the formation process of the oxide shell was analyzed in detail by transmission electron microscopy. Using SiNWs as channels, back gate-type field effect transistors (FETs) were fabricated on p-type silicon wafers. FETs with core-shell SiNWs channels exhibited smaller hysteresis in the drain current (I_d) vs. gate voltage (V_GS) characteristics and higher on/off drain current ratio (I_ON/I_OFF) than those with bare SiNWs channels.     

Analysis of Software Test Item Generation—Comparison Between High Skilled and Low Skilled Engineers

Recent software system contain many functions to provide various services. According to this tendency, it is difficult to ensure software quality and to eliminate crucial faults by conventional software testing methods. So taking the effect of test engineer's skill on test item generation into consideration, we propose a new test item generation method, which supports the generation of test items for illegal behavior of the system. The proposed method can generate test items based on use-case analysis, deviation analysis for legal behavior, and faults tree analysis for system fault situations. Prom the results of the experimental applications of our method, we confirmed that test items for illegal behavior of a system were effectively generated, and also the proposed method could effectively assist test item generation by an engineer with low-level skill.